SHANGHAI FREE TRADE ZONE · EQUIPMENT SOURCING & EXPORT info@suntc.com
SSUNTCGROUP · SHANGHAI
SOURCING INSIGHTS · PRACTICAL HOW-TO

China Export Controls on Machinery: A Buyer’s Document Checklist

New Chinese export-control rules for tunnel boring machines, walking excavators and related items start on 18 November 2026. Here is what they cover, and the classification and documents to agree with your supplier before deposit.

Published 16 November 2026 · SUNTC Group · Sourcing Insights

TL;DR: China export controls on machinery widen on 18 November 2026 to cover full-face tunnel boring machines, walking excavators with specified characteristics and plateau-type wet shotcrete machines, plus listed parts and technologies. Exports to “sensitive countries and regions that have disputes with China” need a licence; other exports use registration and a no-transfer commitment from the exporter and end user. Machines that are not controlled but have similar parameters must say so on the customs declaration, so buyers should agree the classification and documents before deposit.

For importers, distributors, contractors and project buyers sourcing construction equipment from China. Reviewed 16 November 2026. China export controls on machinery take a new step this week. On 19 October 2026 the Ministry of Commerce (MOFCOM) and the General Administration of Customs published Announcement No. 50 of 2026, and it takes effect on 18 November. Most buyers of standard equipment will not need a licence. But the rules change what your supplier must declare at the port, and how quickly it must answer if customs asks questions. This guide explains what is covered and which documents to agree before you pay a deposit. It is practical guidance, not legal advice.

China export controls on machinery: buyer checklist from classification and end-user commitment to customs declaration and the 7-working-day customs query window, effective 18 November 2026
A four-step document check for machinery orders under China’s new export-control rules. Illustration by SUNTC Group, based on MOFCOM and Customs Announcements No. 50 and No. 52 of 2026.

What do China’s new export controls on machinery cover?

According to the MOFCOM and Customs Announcement No. 50 of 2026 (19 October 2026, Chinese), summarised in English by HKTDC Research (5 November 2026), three groups of items join China’s dual-use export control list:

Control codeItemWhen it is controlled
2B906, 2A906, 2E906Full-face tunnel boring machines (earth-pressure, slurry and rock TBMs), cutterheads, screw conveyors, segment erectors, main drives; remanufacturing technologyListed machine types and specially designed parts
2B904, 2E904Walking excavators (reference customs code 8429521920); electro-hydraulic proportional control technologyAny one of: vertical obstacle over 1.2 m, fording depth over 1.5 m, trench crossing over 3 m, walking gradient over 40°
2B903, 2A903, 2E903Plateau-type wet shotcrete machines for use above 3,000 m, plus listed engines, oxygen supply units, motors, compressors, chassis and folding boomsAll listed characteristics, e.g. engine over 75 kW and 680 N·m, compressor over 15 m³/min

The announcement defines a walking excavator as a machine that moves itself by combining the motion of its working device, outrigger legs or wheels, so that it can dig across general terrain. A conventional wheeled or crawler excavator is a different machine type. Even so, the test is based on characteristics, not on the product name, so ask for the classification in writing rather than assuming.

Who needs a licence, and who signs a commitment?

Announcement No. 50 sets two routes:

  • Licence: exports of the listed items to “sensitive countries and regions that have disputes with China” need a MOFCOM licence. The announcement does not name those destinations.
  • Registration: exports to all other destinations get an export certificate by registering information. The exporter and the end user must commit not to transfer the Chinese-origin items to the disputed countries and regions without a licence.
  • Re-transfers abroad: organisations and individuals outside China may not pass these Chinese-origin items to those destinations without a licence.

In its spokesperson’s remarks of 19 October 2026, MOFCOM said it will review licence applications under the law and approve those that meet the requirements. For buyers, the practical point is simple. If your order includes a controlled item, expect to provide end-user information and sign a commitment. Then make sure your own resale or project plans are consistent with it.

Why does the customs declaration matter even for uncontrolled machines?

This is the part most likely to affect ordinary orders. Under Announcement No. 50, a controlled item must be marked “dual-use item” with its control code in the remarks box of the customs declaration. An item that is not controlled but has close parameters, indicators or performance must be marked “not a controlled item”, with its specific parameters listed. If customs doubts that information, it will query it, and the goods will not be released during the query.

The query procedure is set by Announcement No. 52 of 2026 (19 October 2026, in force on publication):

StepTime limit in the announcement
Exporter answers the customs query notice with stamped documents (Chinese translations for foreign-language papers)7 working days from receipt
Customs decides, or asks MOFCOM to organise an identification15 working days from complete materials
MOFCOM issues its identification conclusion15 working days from complete materials

Time for extra materials and testing does not count, and major or complex cases are not bound by these limits. Unrelated goods on the same declaration can be split off and cleared with customs’ approval. A trade-compliance roundup by inspector.ltd (14 November 2026) sums it up: control status depends on technical parameters, design purpose and end user, not just HS codes.

China export controls on machinery: a buyer’s document checklist

Ask your supplier for these items before deposit. They are useful whether the answer is “controlled” or “not controlled”.

  • Written classification: the supplier’s statement of whether each machine, attachment and spare part falls under Announcement No. 50, and the reasoning.
  • Parameter sheet: the values that the declaration may need, such as obstacle height, fording depth, trench width and gradient for walking-type machines, and the HS code the exporter will declare.
  • Technical file: specification, drawings or brochure and any test reports. These are the documents customs may request under Announcement No. 52.
  • End-user information: who will use the machine, where and for what. If the registration route applies, see the no-transfer commitment wording before you sign it.
  • Licence or registration timing: who applies, how long it may take, and the shipping date that depends on it.
  • Contract clauses: who carries storage, demurrage and delay costs if goods are held during a query, and what happens if a licence is refused.
  • Spare parts and technical data: whether later deliveries of parts, software or documents are covered by the same classification.

Our pre-shipment checklist covers the inspection side. If you resell across borders, also read our re-export review guide. If you are planning shipments around the 2027 holiday, see Chinese New Year 2027 order planning.

What does this look like on a real order? (hypothetical)

Hypothetical example, not a customer case: a distributor orders two wheeled excavators and a spare-parts kit. The supplier confirms in writing that the machines are not walking excavators under code 2B904 and lists the HS code and key parameters it will declare. The distributor files that statement with the proforma invoice. If customs queries the shipment, the exporter already has the classification note, specifications and contract ready inside the 7-working-day window. Nothing here guarantees release, but it removes avoidable delay.

SUNTC view: settle classification at the quotation stage

New controls rarely stop a well-documented standard order. Uncertainty does: vague product names, missing parameters and nobody owning the paperwork. Agree the classification, documents and responsibilities at the quotation stage, and the new rules become one more line on your checklist.

Shanghai Suntc Group Co., Ltd. is an international trade and export company in Shanghai Free Trade Zone, not a manufacturer. We can discuss wheeled excavators, material handlers, agricultural machinery and hydropower equipment, together with supplier documents and export coordination. Manufacturer, configuration, classification and contracting responsibilities are confirmed in each specific quotation. Contact Jack Chen at info@suntc.com or WhatsApp +86 150 0214 3331, visit our contact page, or send your equipment list below.

Buyer questions

When do China’s new export controls on machinery take effect?

MOFCOM and Customs Announcements No. 49 to 51 of 2026, including the controls on tunnel boring machines, walking excavators and plateau-type wet shotcrete machines, take effect on 18 November 2026. The customs query procedure in Announcement No. 52 applied from 19 October 2026.

Are ordinary wheeled excavators controlled?

The listed excavator item is the walking excavator with at least one specified characteristic, such as crossing vertical obstacles over 1.2 m. Conventional wheeled excavators are a different machine type, but classification depends on the actual machine, so ask the exporter for a written classification.

Will I have to sign an end-user commitment?

If you buy a controlled item for a destination outside the licence category, the registration route requires the exporter and end user to commit not to transfer it to the disputed countries and regions without a licence. Check the wording against your resale plans.

What happens if customs queries my shipment?

The exporter has 7 working days to submit stamped documents such as the contract, invoice, transport papers, a statement of performance and use, and technical data. The goods are held until customs, and if needed MOFCOM, reach a conclusion.

DISCUSS YOUR REQUIREMENT

Get a clearer next step for your purchase.

Submit directly here. Attach a relevant drawing, equipment photo or purchase list. Your inquiry goes to info@suntc.com.

Attachments (optional)

PDF, JPG, PNG, WebP, XLSX, CSV, DOCX, DWG or DXF. Please export older Excel files or macro-enabled documents to XLSX, CSV or PDF.

Up to 5 files. 5 MB per file; 10 MB combined.

    By submitting, you ask SUNTC to use your contact details and requirements to respond to this inquiry. Your message is sent directly from this website. Selected files are sent as email attachments with your inquiry. Please share only documents relevant to your request.

    Prefer WhatsApp? ↗

    Privacy notice

    WhatsAppGet a quotation ↗